( How I made this reel · Prompts )

A 3D scene,
animated with AI.

Every prompt and every step I used to turn a simple 3D blockout into a cinematic shot, all on Higgsfield.

( The idea )

AI video is great at realism but bad at following an exact layout and camera path. So you lock both in a simple 3D blockout first, then let Seedance 2.5 turn it into a real scene.

( Step 01 )

Build the 3D blockout

You don't need to know Blender. Connect the Higgsfield MCP to Claude, and Claude builds the scene for you in Higgsfield's hosted 3D tool. Nothing to install.

Describe the scene, the camera moves, the timing and the FOV. Keep it simple: the blockout only needs the layout and the camera right. Seedance takes care of the acting later.

Prompt · Claude + Higgsfield MCP
/3d-jutsu

Use Higgsfield 3D Jutsu (hosted Blender) to build a simple blockout 3D scene: a modified red 2000 Mitsubishi Colt 3-door hatchback raised on four red jack stands in the middle of an open green grassy meadow, with a block character lying on his back on a mechanic's creeper under the front bumper, and an open red toolbox beside the front of the car.

SCENE (simple blockout, not too much detail, metre scale)
• Car: short boxy hatchback built from simple boxes, about 3.9 m long, 1.7 m wide. Red body, black box roof, flat black spoiler on the back edge of the roof, six small black round holes in a row across the front bumper (three on each side), two small white round fog lights below them. Four black cylinder wheels hanging just clear of the grass. About 35 cm clearance under the front bumper.
• Character: blocky person made of cubes (cube head, box torso, box arms and legs), grey-blue shirt, denim-blue pants, white shoes. Lying on his back on a low flat creeper with four small caster wheels. His head and chest are under the front bumper, his knees bent up and his feet flat on the ground in front of the car.
• Ground: a large flat plywood sheet under the front of the car with a light-brown cardboard sheet on top, where the creeper rolls. A few thin grey cylinders as wrenches scattered beside the red toolbox.
• Environment: big flat green grass plane, a few low green hills in the far background, 3-4 simple cone trees on the horizon, light blue sky.
• Look: Blender solid viewport style (Workbench), flat material colors, soft shadows and cavity, no textures.

CAMERA (vertical 9:16, high FOV, about 18 mm lens, one continuous take, no cuts)
Animate one camera like a robotic motion-control arm: each move is fast with ease-in/ease-out, lands with a tiny overshoot and settles perfectly still. The camera never goes through the car, the stands or the character.
• 0.0–1.6s: camera at ground level (30 cm high), side view of the front of the car, tracking sideways as the character rolls OUT from under the car feet first on the creeper.
• 1.6–5.0s: near-locked low side angle, very slow push-in on the character lying next to the bumper (he talks to camera here).
• 5.0–6.6s: the character rolls back IN under the car, only his bent legs stay out. Camera whips up to a low front-left three-quarter, about 1 m high.
• 6.6–8.1s: whip across the front of the car to a front-right three-quarter, 1.5 m high, looking down at the bumper and the legs.
• 8.1–9.55s: drop to dead centre in front of the car at ground level, wide.
• 9.55–11.1s: rise to the front-right corner, high and close, looking steeply down at the hood and the legs.
• 11.1–12.55s: descend back to low front centre, slow push-in toward the bumper.
• 12.55–15.0s: rise straight up into a top-down overhead view of the front of the car: bumper across the top of frame, legs on the cardboard, toolbox on the left. Lock the frame until the end.

OUTPUT
15 seconds at 24 fps (360 frames). First render me 3 still frames to check: frame 20, frame 180 and frame 350. After I approve, export the full animation as an MP4 at a small resolution (540x960) using the Workbench engine so it renders quickly.
TipClaude shows you a few test frames first. If something's off, just say it in plain words ("the car is too low", "the last shot isn't straight overhead") and it fixes it, then exports the MP4.

( Step 02 )

Generate the reference sheets

One reference for each element: the character, the car and the location. The location image isn't a start frame. It tells Seedance how to render the environment.

Character: I used my own character sheet on Higgsfield. For a new one, ask for a grid with front, side, back and face close-up views on a clean light grey background, same as the car sheet below.

Car sheet · GPT Image on Higgsfield · 3 photos of my car as references

Prompt · Car sheet
Car reference sheet for the red Mitsubishi Colt (Mirage) 3-door hatchback, 2000 model, modified, exactly matching @img1, @img2 and @img3. Multiple views: front, side, back, front three-quarter close-up, top-down view. Realistic photographic style, not illustrated or 3D rendered.

Key details that must stay identical in every panel:
• Paint: bright red body, slightly sun-faded, with a GLOSS BLACK ROOF and black window pillars.
• Front: aftermarket front bumper with SIX round open vent holes (three on each side of the license plate, in a row), two round white fog lights below them, a thin black front lip splitter, a red slatted grille with the Mitsubishi emblem, clear teardrop headlights.
• Rear: large black roof spoiler with an integrated red third brake light strip, smoked dark-red tail lights, black surround around the rear window, rear wiper, single angled chrome exhaust tip on the right side, red rear bumper with a recessed license plate area.
• Side: gloss black mirrors, dark smoked wind deflectors above the side windows.
• Wheels: wide silver deep-dish style wheels with a simple flat face, slightly stretched tyres.
• Stance: lowered, small gap between the tyres and the arches.
• Interior visible through the glass: beige racing bucket seats with harness slots.
• Egyptian license plates with the blue "EGYPT مصر" band on top and the white area left blank.

Clean light gray background. Views arranged in a grid layout like a professional character design sheet. Additional detail swatches at the bottom: front bumper vent holes, wheel, rear spoiler, tail light, exhaust tip, bucket seat. Labels for each view. Ultra detailed, photorealistic, cinematic quality, 35mm film grain, natural lighting. Make sure the six round bumper vents, the black roof and the black spoiler stay the same in every panel, including the overhead view.

Location · Seedream on Higgsfield

Prompt · Location
A wide eye-level photo of an open grassy meadow at golden hour, square 1:1 framing, 24mm lens. Lush slightly uneven green grass with small wildflowers, gentle rolling hills fading into soft haze in the background, a few scattered trees on the horizon, a wide sky with soft warm clouds. In the center of the meadow, a large flat sheet of plywood lies on the grass with a flattened cardboard sheet on top of it, an open red toolbox beside it and a few wrenches in the grass. Low warm sun from the side casting long soft shadows across the grass, golden rim light on every blade, slight lens flare. Warm amber highlights with soft green shadows, lifted blacks, gentle vignette, muted film-like fade, fine grain, sharp focus throughout, cinematic outdoor photography.
TipThe plywood sheet is there for a reason. A creeper can't roll on grass, so give it something flat to roll on.

( Step 03 )

Record the line

I generated the hook line in ElevenLabs and gave it to Seedance as an audio reference, so the lip sync follows a real performance.

Voice line · ElevenLabs
[short inhale] [slightly out of breath] Nobody shows you this... [exhales] a 3D scene, animated with AI.
TipKeep it under 3 seconds and trim the silence at the end. It has to fit between rolling out and rolling back under the car, or it gets cut off.

( Step 04 )

Render it with Seedance 2.5

On Higgsfield: Video → Seedance 2.5, 9:16, 1080p, 15 seconds. Upload everything:

@vid1
3D blockout
@img1
Character sheet
@img2
Car sheet
@img3
Location
@aud1
Voice line

The most important part is the reference map at the top. It tells Seedance which reference controls which element, which matters a lot when you have more than one. Then describe every moment, action and camera move with its timing.

TipThe prompt box scrolls. Hit Copy to grab the full prompt.

( Step 05 )

Same scene, any environment

Once the blockout is locked, you can reuse it forever. Keep @vid1 and the prompt, and swap one reference: a new location as @img3, a new car as @img2, or a new character as @img1. Then update its line in the reference map.

Example · sunny Alexandria courtyard · replace the @img3 line

Swap · @img3 line
• @img3 (location) → environment style reference, not the exact environment: open-air courtyard in Alexandria paved with interlocking red and beige patterned pavers, tall date palms, a cream colonial-style building with wooden shutters, a kiosk with a red-and-white striped awning, blue sky with big white clouds. Layout follows @vid1. Lighting is bright midday sun.

And · replace the Lighting line in Scene Base

Swap · Lighting line
• Lighting: bright Mediterranean midday sun, palm fronds casting moving dappled shadows across the pavers, the red bodywork and the mechanic. Soft bounce light from the cream building fills the shadows. A small LED work light under the car spills a white glow onto the cardboard.

Same camera moves, same timing, a completely different world.

( Higgsfield Talent Contest )

Got a film in your head?
Make it now.

$1,000,000Prize pool
20Awards
$200KFirst place
Black Friday · up to 65% off

Any theme. Build your blockout, render it on Higgsfield, and enter.

Start on Higgsfield